V8 M3 High Flow Performance Filter

 

Active Autowerke

 

2008 E90 M3, 2008 E92 M3

 


$995.00

 

+15 HP @ 8400 RPMS  


+11 Ft / LBs @ 6700 RPMs  

 

Active Autowerke now offers unparalleled performance software for all 2008 on BMW E9X M3 that uplifts the V8 4.0 liter to new levels in BMW performance tuning.  Through careful remapping of the factory BMW DME tables, various elements such as ignition timing, fuel delivery, and part throttles are reworked to create performance gains.

On some of the BMW V8 M3s, there are inherent situations of a rough, cold start idle that makes for poor drivability.  With the new Active Autowerke software, the camshaft vanos tables are also re-mapped to eliminate this rough idle scenario to a smoother, cold start idle.

The Active Autowerke upgraded software is designed to operate with gasoline that has an average octane rating with full emissions to create a clean burning combustion with good AFR’s all within factory specifications.


The RPM limiter for each gear is also replaced to a higher range with the speed limiter also removed (optional).  These are all designed to work flawlessly together for maximum performance.


Other additional features that enhance the Active Autowerke performance software... The Stationary RPM Limiter raised, the RPMs are held at a constant rate until the car start to move, this is similar to the LAUNCH CONTROL mode on the 6MT owners.  The RPM threshold can be varied, but Active recommends a 4000 rpm for this Launch Control.


Other optional feature are available such Race Gas Tunes, Nitrous Tunes, and Off-road applications. 


Custom configurations are available when pairing with the Active Autowerke Signature Exhaust system, pulley upgrade or Cold Air Intake system.  (please call us for your custom tune) 

 

Key Features


Realisitc 15 Horspower gains throughout ENTIRE RPM range

Higher torque over factory settings throught RPM range

Recalibrated settings for a smoother and more responsive part throttle transition

Recalibrated settings for a smoother and more responsive power delivery

FULL control over DME fuel curve on LOCKED or OPEN DME

Modified VANOS camshaft remapping eliminating rough COLD start enable

Top speed limiter removed

Raised RPM thresholds in sepecific gears

Aggressive LAUNCH CONTROL feature

Tune available for 91 or 93 octane fuel

Full FREE tech support and assistance

Fast turn-around delivery for a easy to do install

 

Performance Specs


15 HP @ 8400 RPMS  

:  

Rear wheel HP measured on the dyno

11 Ft / LBs @ 6700 RPMs  

:  

Rear wheel FT/LBs measured on the dyno

 

V8 M3 AA Software Upgrade

Dyno